Author Topic: airbox assembly k3 (Read 3413 times)

Trigger · « **Reply #15 on:** January 08, 2014, 09:06:31 AM »

Piki, in the last picture. Your breather element/condensation trap or what ever other people call it, isn't it up side down?. Nice clean bike.

Piki · « **Reply #16 on:** January 08, 2014, 11:32:59 AM »

Hi trigger, it is in the correct position!!!

MIKE550/4 · « **Reply #17 on:** January 08, 2014, 12:14:32 PM »

Yeah that looks right, next part goes in upside down with spout pointing up

thanks for the photos

MIKE550/4 · « **Reply #18 on:** January 08, 2014, 07:17:04 PM »

So after lots of input think I am there just need correct 18mm washer

if this is wrong I am fitting pods

MIKE550/4 · « **Reply #19 on:** January 08, 2014, 08:01:20 PM »

its where the washer is now just wrong size fitted

18mm needed

Piki · « **Reply #20 on:** January 08, 2014, 08:34:37 PM »

Thank you Oddjob I think that you are fine and I will replace it the weekend. Very good job Mike!!!
Thank you and sorry for my English.

MIKE550/4 · « **Reply #21 on:** January 08, 2014, 09:12:47 PM »

thanks piki.... long way to go and as you see a novice..... but I am learning

MikeM · « **Reply #22 on:** February 23, 2014, 07:16:21 PM »

well I gave fitting the carbs a go, chamber and air filter box..... do hope this is right as I don't fancy doing it again... was not easy

before pic

Trigger · « **Reply #23 on:** February 23, 2014, 07:23:20 PM »

Looking good Mike.

mickwinf · « **Reply #24 on:** February 23, 2014, 09:01:58 PM »

yes nice job!

Bitsa (Ralph Wright - RIP) · « **Reply #25 on:** February 23, 2014, 09:03:47 PM »

Agreed carbs look great
Cheers
Bitsa

Honda-SOHC