« previous next »
Pages: [1]   Go Down

Author Topic: no start  (Read 1148 times)

Offline steven400/4

  • SOHC Expert
  • Posts: 313
    • View Profile
no start
« on: March 04, 2014, 11:59:37 AM »
ok peeps i,ve built a few 400/4 from scratch just finning my show bike off but car,nt get it to turn over everythink is new and all connected up kill switch is,nt in the off position the clutch cut for not starting in gear is connected all fuses are ok i have power from battery to started if i take starter off and jump it on a battery it turns off but on the bike when i push the starter button nothin????
i now it must be somethink silly but i car,nt think what >:( >:( >:(
Logged
cb400f2 x7
honda ss 50
gsx 1400

Offline LesterPiglet

  • SOHC Pro
  • Posts: 986
  • 1977 CB550F2
    • View Profile
Re: no start
« Reply #1 on: March 04, 2014, 12:15:06 PM »
Try bridging the solenoid posts. I'm not familiar with the 400, but I would also try bypassing the clutch safety. Is your neutral light working?
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Set/sit. Bought/brought FFS. Bloody Americans.


Les Ross. Certified by a Professional

Offline Clem2112

  • Midlife
  • SOHC Expert
  • Posts: 282
  • CB400F1 1976 R1200GS 2016 Matchless G80 1955
    • View Profile
Re: no start
« Reply #2 on: March 04, 2014, 12:25:16 PM »
Bad earth ??
Zener diode is in the starter circuit isn't it?
Logged

Offline steven400/4

  • SOHC Expert
  • Posts: 313
    • View Profile
Re: no start
« Reply #3 on: March 04, 2014, 05:14:12 PM »
sorted it changed the selenoid still no luck so put old one back on then it turned over so must of had a dodgey joint
Logged
cb400f2 x7
honda ss 50
gsx 1400
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal