« previous next »
Pages: [1]   Go Down

Author Topic: point plate screws  (Read 848 times)

Offline Liam

  • SOHC Associate
  • Posts: 69
    • View Profile
point plate screws
« on: April 21, 2014, 08:01:45 PM »
Hi fellas…

Points fixing / back plate screws are pretty chewed up…  Anyone tell me the size for replacements?

Cheers
Logged

Offline Trigger

  • Grogu
  • *
  • Posts: 8436
  • Engines built on reputation, not advertising.
    • View Profile
Re: point plate screws
« Reply #1 on: April 21, 2014, 08:48:16 PM »
5mmx12mm on a K2. Are you taking about the three that the plate turns on? Sorry adjusts on.
« Last Edit: April 21, 2014, 08:53:35 PM by trigger6969 »
Logged

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: point plate screws
« Reply #2 on: April 21, 2014, 09:23:06 PM »
Again spot on Trig but never did know the size for the points or 2-3 plate.Seen the 3 you have spoke about on ebay.de
Cheers
Bitsa
Logged
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

Offline Liam

  • SOHC Associate
  • Posts: 69
    • View Profile
Re: point plate screws
« Reply #3 on: April 23, 2014, 07:23:41 PM »
Cheers…  All are pretty "worn".  I'll check ebay out for replacements.
Logged

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: point plate screws
« Reply #4 on: April 23, 2014, 07:33:48 PM »
I am fairly sure DS will have them
Cheers
Bitsa
Logged
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal