Author Topic: Air box rubber boots.  (Read 1221 times)

Offline mick

  • SOHC Master
  • Posts: 1477
    • View Profile
Air box rubber boots.
« on: August 31, 2014, 03:55:45 PM »
Hi my next purchase for my 750 is going to be a LPM KO airbox so I will be getting some airbox to carb boots,

 has anyone bought these and if you have are they ok ? cheers Mick  ;)

http://www.ebay.co.uk/itm/201153825556?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Offline H2Eric

  • SOHC Member
  • Posts: 134
    • View Profile
Re: Air box rubber boots.
« Reply #1 on: August 31, 2014, 06:22:51 PM »
No, but I got a set of repro ones from David Silver and they seem to be very good quality.

cheers
Eric

Offline RGP750

  • SOHC Master
  • Posts: 1107
  • "always look on the bright side of life"
    • View Profile
Re: Air box rubber boots.
« Reply #2 on: August 31, 2014, 06:51:43 PM »
Bought mine from Silvers ,aftermarket and perfect.
1972 500/4
1973 CB175
1972 CB175
1959 BSA Super rocket
1927 960cc Matchless 'v' twin
1969 750 K0

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: Air box rubber boots.
« Reply #3 on: August 31, 2014, 07:01:56 PM »
About time after slaggin off pattern crap for ages but I have to say its getting alot better so far I am pleased with the pattern stuff I have bought
Cheers
Bitsa
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

Offline mick

  • SOHC Master
  • Posts: 1477
    • View Profile
Re: Air box rubber boots.
« Reply #4 on: August 31, 2014, 07:07:03 PM »
Cheers chaps i'll have a butchers at Silvers site  ;) and did I hear right Bitsa said pattern stuff woz ok ?  ::)  ;)  :)

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: Air box rubber boots.
« Reply #5 on: August 31, 2014, 07:11:58 PM »
Mick
Cough cough yep
Christ almighty did I say that b4 the scotch?
Cheers
Bitsa
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

Offline AshimotoK0

  • Grogu
  • *
  • Posts: 7386
  • Mad Scientist.... more power Igor ! ٩(̾๏̮̮̃̾๏̃̾)۶
    • View Profile
Re: Air box rubber boots.
« Reply #6 on: August 31, 2014, 07:48:40 PM »
Watch it with the LPM K0 airbox. I am told you have to shave a bit off the air filter element to get it to fit. ( may have been modded now, mine was bought yonks ago from them) Also they have lots of mould release agent on them, which is difficult to remove before painting. Don't ask me how I know this! :'(

Cheers ...AshD
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: Air box rubber boots.
« Reply #7 on: August 31, 2014, 08:37:35 PM »
After me giving them their praise have to say the left hand k2 switch is not all that.Wires a bit short and the angle of the clutch cable aint right, so far the right switch is spot on locating pin and all unlike the left.Will see how it goes.
Cheers
Bitsa
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

Offline Bitsa (Ralph Wright - RIP)

  • SOHC Jedi
  • Posts: 2937
    • View Profile
Re: Air box rubber boots.
« Reply #8 on: September 01, 2014, 06:57:40 PM »
Well connected up most of the wiring and have to say most work well indicators lights etc.
Still need some bits but thats a different story
Cheers
Bitsa
Long Live Best Bitter.Status Quo and Sohc Bikes and common sense which you can not teach

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal