Well as some of you may know after building my cb550 cafe racer and having trouble sourcing certain parts, i always planned to try and start my own small business on the side doing a range of parts for the our beloved cbs. Below will be a rough list of the parts i either have in stock and parts i hope to have in stock soon. If theres anything you after i can certainly check and see if its something i can supply.
Here is the rough list with what photos i have so far most items will be on ebay and hopefully soon my website
£9.99 Rev cable blanking plugs cb450 500t cb500 cb550 and cb750
£14.99 Alloy starter motor delete plugs to fit CB350 Twins (68-72) CB350G (73) CL350 (68-73) SL350 (69-70) CB360 (74) CB360G (74)
CB360T (75-76) CL360 (74-75) CB450 (68-74) CL450 (68-74) CB500T (75-76)
£129.99 cb750 k fork tubes
£29.99 cb550 fuel taps petcocks
£19.99 cb brake rods 470mm long direct replacement
£19.99 cb brake rods 490mm long designed for fitting to aftermarket rear sets etc
£2.70 cb side panel rubbers
£2.70 cb ignition switches
£3.40 EACH tappet covers to fit c50 c70 c90 cb400 cb500 cb550
£11.99 oil pressure switch to fit cb400 cb500 cb550 and cb750
I can also get a range of forsa enterprise rear shocks. According to a lot of fellas on the american forum seem to highly rate them. I have only order one set for my cb550 to test them out
excuse some of the photo the quality isn't great better photos to come
This is an alloy adaptor for 70s/80s bmw r70 r80 r100s to convert the speedo drive to fit standard (same as honda clocks) speedos