Small Plate location CB500 Four

[Trigger]

Anyone have an idea where part number 50400-323-000 goes on a CB500K0. The microfiche shows the part but, not its location.Help

[Nurse Julie]

According to Google it's an Ignition Coil Cable protector which you probably already know, so I may have been no help to you at all Trigg 

[simonster]

The attached should help.


Sent from my iPhone using Tapatalk

[simonster]

And this..


Sent from my iPhone using Tapatalk

[simonster]

Sorry the images aren't too clear, it is part number 19 which is a protective plate for the hytension leads.


Sent from my iPhone using Tapatalk

[Trigger]

According to Google it's an Ignition Coil Cable protector which you probably already know, so I may have been no help to you at all Trigg 

No worries girl. I know what it is but, can't find a place for it
Simon, It has a hole but, the hole is a little too big for the bolt on the coils.

[Johnwebley]

is it the soft metal clip/strap ,and the hole is the pin the round tank rubbers fit on?

[simonster]

I found that mine was missing  and I made a plate from thin ally to fit the 6 mm bolt that threads through the ignition coil bracket. It wasn't essential but keeps the leads from gaping.


Sent from my iPhone using Tapatalk

[Lobo]

Trig... no 500' knowledge, but it is this part - ie to keep #1 & #4 ign leads clear of gubbins abouts the top of the cylinder head?

S

[simonster]

I should also say, I'm still a novice on the renovation of these motors and I could be wrong. That said the piece I made does the job as I suggested.


Sent from my iPhone using Tapatalk

[Ewan 500 K1]

here you go Trig, it protects / guides the blue wire from the coil to the loom. Or at least thats what it does on mine ! ..... while noting that the parts diagram has it the other way round and the other way up

[ Guests cannot view attachments ]

[Ewan 500 K1]

and another [ Guests cannot view attachments ]

[Trigger]

Cheers Ewan, Bloody strange little part and all for one wire. You also have a bolt missing out your horn mate.

[Trigger]

is it the soft metal clip/strap ,and the hole is the pin the round tank rubbers fit on?

That's a harness strap/hook that goes on the left side John.

[mickwinf]

on mine its like this but don't know if its correct, ewans way looks more logical.