CB750F Rings

[Trigger]

Has anyone got a piston ring set from Cruzinimage for a CB750F??? And did it fit the F piston.

[JamesH]

Pretty sure HondaMan on the us forum has put up quite a few posts about the crusinimage kit. I recall there were some issues with the rings and deburring of the pistons required on some eqrly sets. Purely from memory so worth searching on the us forum Graham. J.

[Trigger]

Cheers James will have a look.

[Seamus]

These folk supply rings and stuff if you are looking at replacements.  In the US unfortunately, but nice parts.

http://www.cyclexchange.net/Honda%20Page.htm

[stuartni]

I will need to double check but I'm pretty I've a complete set of cb750 honda piston rings (not sure if theres any different between years and models). I bought a job lots of parts at an auto jumble and when i checked the part number for them it was for a cb750 think there was oem cb750 piston as well from memory but i shall check and let you know.

[Trigger]

The CB750F sometimes have different pistons than the 750K and the rings that fit this type of piston are thinner than the 750K.