« previous next »
Pages: [1]   Go Down

Author Topic: Cross head bolts.  (Read 1722 times)

Offline dieffe

  • SOHC Member
  • Posts: 121
    • View Profile
    • My website
Cross head bolts.
« on: February 01, 2015, 09:01:12 PM »
I have been playing with the engine on the K1. cleaned the head, lapped the valves, new stem seals and put it back together after a general clean.
Trouble is I have run out of new cross head bolts and have still got the transmission cover to fit. Does anyone know where to get just the odd few or better still, anyone who does whole engine kits?

Here's how far I've got.

Logged

Offline Trigger

  • Grogu
  • *
  • Posts: 8436
  • Engines built on reputation, not advertising.
    • View Profile
Re: Cross head bolts.
« Reply #1 on: February 01, 2015, 09:06:20 PM »
Yamiya do a full kit or just order some off fleabay.

Forgot to mention: you can not get these machine screw in the small head. OEM only.
« Last Edit: February 01, 2015, 09:15:10 PM by Trigger »
Logged

Online AshimotoK0

  • Grogu
  • *
  • Posts: 7408
  • Mad Scientist.... more power Igor ! ٩(̾๏̮̮̃̾๏̃̾)۶
    • View Profile
Re: Cross head bolts.
« Reply #2 on: February 01, 2015, 11:04:10 PM »
Saisei  can get them
Logged
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.

Offline hondaking

  • SOHC Associate
  • Posts: 56
    • View Profile
Re: Cross head bolts.
« Reply #3 on: March 11, 2015, 09:54:49 PM »
Just got some off ebay in stainless steel and for 6 x 90mm I bought 50 they cost me £23.00 free p/p I just cut them to the length I needed and they look just like the originals
Logged

Offline philward

  • SOHC Jedi
  • Posts: 2800
    • View Profile
Re: Cross head bolts.
« Reply #4 on: March 11, 2015, 11:17:08 PM »
Hondaking
Can you post the link for those screws off ebay please
Phil
Logged
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: Cross head bolts.
« Reply #5 on: March 12, 2015, 07:10:19 PM »
Stainless into alloy... A recipe for disaster unless you use copperslip grease on the threads.
Logged
Where's that 10mm socket got to?

Offline hondaking

  • SOHC Associate
  • Posts: 56
    • View Profile
Re: Cross head bolts.
« Reply #6 on: March 12, 2015, 09:16:33 PM »
All copper slip covered and old stainless allen bolts removed after being in for 13 years Copper slip was still on old bolts
Logged

Offline dieffe

  • SOHC Member
  • Posts: 121
    • View Profile
    • My website
Re: Cross head bolts.
« Reply #7 on: March 12, 2015, 09:23:20 PM »
Quote from: philward on March 11, 2015, 11:17:08 PM
Hondaking
Can you post the link for those screws off ebay please
Phil
Hi Phil, I got a load of nuts and bolts from these people, they seemed fine to me and there is quite a variety.

http://www.mrmegapack.co.uk/motorcycle-megapacks-15-c.asp
Logged
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal