Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
I am trying to figure out what way do the front fender go.Please have a look at the picture to see if I am making a mess.The other thing is the rear shocks. I am having big problems with the nut to hold them in place. I have tried 17cm bolts but they are too small, the next size up is too lose. Any idea? ThanksEl__burro
The calipers are identical as the bikes never originaly had two calipers, you can connect in one of two ways(1) use a longer twin banjo bolt with proper copper washers in all the joints(2) remove the brake light switch and use a single banjo with washers there------If you want a brake light switch use a GL1000 master cylinder(I find this a better idea anyway as it moves more fluid) and connect to the brake light switch on the masterIf it has never had twin discs you also need a different speedo drive plate. if you send me an email direct I did a word document years ago on fitting twin discs to a 500
Thanks Ash, I have one of each can i mount them? Are the callipers the same though? (I also have a matching pair of brackets).ThanksEl__burro