« previous next »
Pages: [1]   Go Down

Author Topic: ht lead order  (Read 1067 times)

Offline dellenty1234

  • Newbie
  • Posts: 33
    • View Profile
ht lead order
« on: June 29, 2015, 09:02:24 PM »
Quick question for an easy answer I hope...

Firing order is 1-2-4-3 as sat on the bike?

What it ht lead goes where? My coils are after market and have fairly equal length leads. So as sat on the bike,  from the left, what lead goes to what cylinder.

Thanks
Logged
Take it apart anyway he says.....

Offline totty

  • SOHC Expert
  • Posts: 389
    • View Profile
Re: ht lead order
« Reply #1 on: June 29, 2015, 09:18:51 PM »
As they're aftermarket check how they're wired. Normally I think left coil is 1 and 4, right 2 and 3. I'm almost certain it's a wasted spark system so the order from each coil doesn't matter.
Logged

Offline dellenty1234

  • Newbie
  • Posts: 33
    • View Profile
Re: ht lead order
« Reply #2 on: June 29, 2015, 09:40:07 PM »
lovely thanks!
Logged
Take it apart anyway he says.....

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: ht lead order
« Reply #3 on: June 30, 2015, 07:04:58 AM »
It doesn't matter what coil goes where, coil 1 & 4 is supplied by the blue wire, coil 2 & 3 is supplied by the yellow wire.

That's for a 400/4 and 550/4 anyway
« Last Edit: June 30, 2015, 07:06:50 AM by mike the bike »
Logged
Where's that 10mm socket got to?

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: ht lead order
« Reply #4 on: June 30, 2015, 06:06:58 PM »
That was too obvious to mention - so I didn't
Logged
Where's that 10mm socket got to?
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal