anti seize grease

[haynes66]

what do you use on your stainless/ali bolts? i've just finished the last of my wurth AL1100 grease but at £25 a tin i'm looking for a cheaper alternative. i didnt pay for my last lot as i used to be a wurth rep so i had a lot of freebies for my shed over the years!

[Green1]

I'v started using Corrosion Block from ACF50 and it doesn't go hard like coppaslip when in contact with water.

Mick

[mike the bike]

It's not just the threads that seize, it's the area under the screw head where it meets the aluminum casting, so put some copperslip there too.

[Lobo]

I'm no alchemist... but what Mike says is what I've been told ... ie you need to 'seal the head' & stop moisture / water getting to the threads...

Ask me in 5 yrs.. I've gone the Copperslip route with Oddjob.

Simon

[Green1]

The garage that drilled out the seized bolts in my Guzzi used a silicon grease as they have known coppaslip to go hard on the threads making it hard to remove bolts.

Mick