SOHC.co.uk Forums > Project Board

Holes in the fuel tank

(1/9) > >>

El__burro:
Good morning, last night i received a slap on my face when I noticed the 2 tiny holes in my fuel tank.
I guess by removing the paint a bit I'll find some more.
Any ideas on what is best to fix this.
I have seen some paste to close the holes, any good? Any brand?

Good day
El__Burro

stevush:
It might sound crazy but it could be welded. I've seen it done before by a chap who filled the tank with water first. When full of water there are no fumes to ignite so although I wouldn't risk it personally it can be done if caution is observed. In your case the holes are underneath and not seen so maybe worth considering?

Steve

El__burro:
I did consider that option but only if no other solution is better.
Welding could perforate the material.
Tank needs to be sealed so been washed out already.
Thank you
el__burro

mike the bike:
I've had that problem too.  I brazed plates over the bottom of the tank but 2 further problems arose;
More holes appeared because the bottom of the tank is as thin as foil.
The rust has a tendency to block the fuel filter.
I used a (modified) Superdream tank until I found a replacement in a breakers but I would consider a tank lining kit, but don't ask me which is the best.

El__burro:
noooooo.
lets stay positive.

Navigation

[0] Message Index

[#] Next page