Brake fitting threads

[gtmdriver]

Can anybody tell me whether the male bake unions on the steel line connecting the lower flexible hose to the front brake caliper are the usual M10 x 1mm please?

[Bryanj]

NO, they are the same as Honda cars BUT you may need the ones with no thread at the tip depending on the make/type of flexible and you have to machine those yourself as they aint used anywhere else

[gtmdriver]

So what thread are they if they're not M10 x 1?

[mike the bike]

I think it's M10 x 1

[Dan]

I ran a braided hose from the m/c to the solid brake line that's connected to the front calliper. It's M10x1.25. If you need any advice try Hel Performance, they were able to answer all my questions and I had a hose delivered the next day.

[gtmdriver]

Thank you all.