« previous next »
Pages: [1]   Go Down

Author Topic: Swingarm bushings  (Read 2281 times)

Offline Noelia

  • SOHC Member
  • Posts: 171
    • View Profile
Swingarm bushings
« on: September 22, 2015, 09:45:15 PM »
Hi all,

I need to replace the swing arm bushings in my cb500 four

Since I'm changing them I would like to put something is going to last.

Any recommendations? I read the original ones are very bad quality? Are the bronze better?

Thanks!!




Sent from my iPhone using Tapatalk
Logged

Offline Bryanj

  • Grogu
  • *
  • Posts: 10815
    • View Profile
Re: Swingarm bushings
« Reply #1 on: September 23, 2015, 09:54:28 AM »
Its not bushes that are poor quality its owners that do not grease them often enough!!
Logged

Offline Noelia

  • SOHC Member
  • Posts: 171
    • View Profile
Re: Swingarm bushings
« Reply #2 on: September 23, 2015, 10:54:31 AM »
I see!! I may be one of those shall I buy the bronze ones? I've read they are easier to install also

http://www.motorcycleclassics.com/mc-how/rear-swingarm-bushings-1973-honda-cb500.aspx


Sent from my iPhone using Tapatalk
Logged

Offline Bryanj

  • Grogu
  • *
  • Posts: 10815
    • View Profile
Re: Swingarm bushings
« Reply #3 on: September 23, 2015, 05:45:21 PM »
Installation is no problem, is getting the old ones out that is!! Also you will find that no matter which you fit a new pivot pin will be needed as the pin wears more than the bushes---sit down when you look up the price tho'
Logged

Offline JamesH

  • SOHC Jedi
  • Posts: 2846
    • View Profile
Re: Swingarm bushings
« Reply #4 on: September 23, 2015, 06:17:21 PM »
Bryan - do you pre-soak Phosphor Bronze bushes in just general engine oil (10w/40) prior to installation?
Logged

Offline AshimotoK0

  • Grogu
  • *
  • Posts: 7392
  • Mad Scientist.... more power Igor ! ٩(̾๏̮̮̃̾๏̃̾)۶
    • View Profile
Re: Swingarm bushings
« Reply #5 on: September 23, 2015, 07:12:13 PM »
Quote from: Bryanj on September 23, 2015, 05:45:21 PM
Installation is no problem, is getting the old ones out that is!! Also you will find that no matter which you fit a new pivot pin will be needed as the pin wears more than the bushes---sit down when you look up the price tho'

Is the pin hardened Bryan, as I got mine reground to suit slighly smaller ID bushes. The guy in Poland will machine undersize bushes, well he does for the 250/350K.

James ... I think you only oil  soak sintered material not solid phosphor bronze... unless the ones you buy are sintered of course.
Logged
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.

Offline Noelia

  • SOHC Member
  • Posts: 171
    • View Profile
Re: Swingarm bushings
« Reply #6 on: September 23, 2015, 07:43:32 PM »

Quote from: Bryanj on September 23, 2015, 05:45:21 PM
Installation is no problem, is getting the old ones out that is!! Also you will find that no matter which you fit a new pivot pin will be needed as the pin wears more than the bushes---sit down when you look up the price tho'

Hi bryanj

How does the pivot pin looks like?

Thanks!


Sent from my iPhone using Tapatalk
Logged

Offline AshimotoK0

  • Grogu
  • *
  • Posts: 7392
  • Mad Scientist.... more power Igor ! ٩(̾๏̮̮̃̾๏̃̾)۶
    • View Profile
Re: Swingarm bushings
« Reply #7 on: September 23, 2015, 07:54:30 PM »
Its item 8 ... Bryan's probably working his nuts off on nights!

[ Guests cannot view attachments ]


[ Guests cannot view attachments ]
« Last Edit: September 23, 2015, 07:56:24 PM by AshimotoK0 »
Logged
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.

Offline Bryanj

  • Grogu
  • *
  • Posts: 10815
    • View Profile
Re: Swingarm bushings
« Reply #8 on: September 24, 2015, 06:19:58 AM »
Thats the one
Logged

Offline Trigger

  • Grogu
  • *
  • Posts: 8436
  • Engines built on reputation, not advertising.
    • View Profile
Re: Swingarm bushings
« Reply #9 on: September 24, 2015, 03:44:44 PM »
Logged

Offline Noelia

  • SOHC Member
  • Posts: 171
    • View Profile
Re: Swingarm bushings
« Reply #10 on: September 27, 2015, 05:41:08 PM »
What I really needed is number 4! All sorted now :)

Thank you!


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal