Motogadget m-unit wiring diagram.

[JustcallmeMrT]

Hoping this might help someone who's doing a rewire using the motogadget m-unit. The bike is definitely not original, all the lights are led, gps speedo/tach combo gauge, new reg/rec, etc. but could still be useful.

[yozzer74]

Have you used motogadget controls too was thinking of getting one of there Speedos .do you have to have the control unit too .do you no

[JustcallmeMrT]

Have you used motogadget controls too was thinking of getting one of there Speedos .do you have to have the control unit too .do you no

I used the motogadget buttons, a pair on each side.  I didn't use their speedo - got a speedo/tach combo gauge from speedhut in the US.

I'm pretty sure you can use any of their stuff independently, you don't need the control unit to use the speedo.

[yozzer74]

How big is that unit

[JustcallmeMrT]

How big is that unit

It's 101mm long,  61mm wide, 28mm deep.

[yozzer74]

Thanks

[Beddgelert]

How have you found the motogadget has performed now that you have had it for a while, I have just bought an m unit, m button, push buttons and new loom?

I looking at positioning the unit next to all the original kit in my new battery box before sending the frame to powder coat

[JustcallmeMrT]

How have you found the motogadget has performed now that you have had it for a while, I have just bought an m unit, m button, push buttons and new loom?

I looking at positioning the unit next to all the original kit in my new battery box before sending the frame to powder coat

It's worked without any issues whatsoever.  Good piece of kit.

Sent from my SM-N9005 using Tapatalk