Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Raymond_Y on February 04, 2019, 11:38:48 AM
-
Hi, just started restoring a 1971 CB500K0. It was originally a US bike and came in boxes, so I am fairly sure some of the bits will be off later bikes and some I know are CB550K3 bits. I have two seats but neither have a hinge. How do I identify if one is a K0 seat and where might I get a hinge (nothing on eBay at the moment). The one hinge I have is much narrower than the mounting holes, more like what I thing the CB750 hinge was like, as it had two. Will any other SOHC hinge fit a CB500 seat?
Many thanks
Raymond
-
Early 550 same as 500
-
K0 seats look like this. Note the large squares.
(http://www.nirvana-motorcycles.com/wp-content/uploads/2014/11/CB500K0-Seat-014-Custom.jpg)
-
K0 seat has no owners manual pocket and has the central spring.
Also has a ‘latch’ mechanism instead of the seat lock ‘plunger’ type from K1 onwards
(https://uploads.tapatalk-cdn.com/20190204/ea9ee88d7c0efb355b0ec744423aa281.jpg)
-
Thanks guys, I definitely have one and possibly two K0 seats.
-
K0 seats look like this. Note the large squares.
(http://www.nirvana-motorcycles.com/wp-content/uploads/2014/11/CB500K0-Seat-014-Custom.jpg)
This is what they should look like Steve .. cost me lot of money but hey ho.
[attachimg=1]
-
Ash, could you post a picture of the underside of you seat.
Thanks
Raymond
-
Ash, could you post a picture of the underside of you seat.
Thanks
Raymond
Here goes Raymond..(one rubber is missing but I did get hold of oneused)
[attachimg=1]
-
Thanks, can I push my luck and ask for a picture of the lock mechanism.
Raymond
-
Early K0 is shown on the brown one already pictured.