This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Piki
346
« on: May 13, 2013, 03:02:39 PM »
Hello, I bought one from the same Seller and it work very good, I recommend it!!!
347
« on: May 12, 2013, 08:43:17 PM »
Hello, anybody has 750F2 camshaft in good condition for sale??
Thank you in advance.
348
« on: May 11, 2013, 09:33:23 PM »
Thank you Bryanj!!
349
« on: May 11, 2013, 12:34:53 PM »
350
« on: May 10, 2013, 10:21:13 PM »
Thank you, I bought RAMAIR by EBay, is cheaper than web site!!
Boggieman, Tomorrow or Sunday I Will go to the garage and I measure the carbs for you.
351
« on: May 10, 2013, 08:22:58 AM »
Hello, I have one question about my camshaft, I take off the camshaft on my 400 four, it has stamped R6, I measure the camshaft lobe measure and it is higher than HONDA specifications. Anybody knows that is the R6 code??
Thank you in advance and sorry for my English one more time...
352
« on: May 10, 2013, 08:13:44 AM »
Hello,it is possible that it fit on the breather cover from head engine to the airbox filter, but the shape is a little rare..
353
« on: May 10, 2013, 07:54:15 AM »
Hello, I have the carbs off the frame, this afternoon I will measure the diameter and let you know.
Where I can get RAMAIR foam??
Thank you.
354
« on: May 09, 2013, 01:45:13 PM »
Hello, how much is it if you send it to Spain/Madrid??
Thank you in advance.
355
« on: May 08, 2013, 07:43:21 AM »
356
« on: May 07, 2013, 09:48:58 AM »
My CB550 K3: 
357
« on: May 07, 2013, 09:29:21 AM »
I also use Vesrah and I have not oil leaks problem at the moment on my CB550 K3 rebuild engine. I skim head engine for peace of mind and use Edelbrock Gasgacinch for the Engine Head Gasket. re-torque the Engine Head bolts does not work, I think that when there is oil leaks, the only solution is take off the engine head, skim head, change the o,rings(both) and use new gasket head engine(good quality or Original).
Now I am working on my 400 Four that has oil leaks also, 400 km after rebuild engine and the oil leaks show on the corner of the engine head, I used cheaper gaskets and o´rings and that is the problem, I check that the measure of the o´rings are different that the originals..... Again I will skim head, Gasgacinch on the Engine Head Gasket, NEW ORGINALS O´rings and Gaskets and pray.................
Sorry for my English....
358
« on: May 06, 2013, 02:31:39 PM »
Hello all. I'm after some advice regarding an oil leak from the head gasket. I've recently rebuilt the engine and been on the road for 200 miles but seem to have got an oil leak from the head gasket. I don't think it's the pucks as the oil only appears on the fin below the head gasket but I will check the pucks by lifting the rocker cover. I'm thinking three options.
1. A slight tweak of the head bolts, risky I know but an easy option.
2. Lift the head and replace head gasket and o rings however it s a new one only 200 miles ago.
3. Lift head, skim head taking minimum off and replace with new gasket and o rings.
Your thoughts would be great fully received. Thanks in advance.
Are they ORIGINAL GASKETS? I think is a MUST use ORIGINAL GASKETS, O,RINGS, or VERY GOOD QUALITY BRAND......
Jim
359
« on: May 06, 2013, 01:36:49 PM »
Hello Steve, sorry but we are "illega-fake", we are not part of the global group  I know that is not correct way, but we are a little club, the members usually doesn´t speak English, the chief used the SOHC logo from the global group but he is not member........
360
« on: May 06, 2013, 12:09:50 PM »
Hello everybody, I am Diego from Spain, I have two Honda SOHC: one CB550 K3 and 400 Four. Here in Spain, there is not Japan bikes from the seventies and is very hard found spares and information about this bikes, I am member of www.sohcspain.com where is the meeting point the Japan bikes owners. Is a pleasure for me be member of this forum, thank you very much everybody. Sorry for me English is very bad, I will not participe much because I do not speak English but I promise read the topics!!! Here you are pics of my two bikes: 
|
Show Posts
