Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Athame57 on August 12, 2021, 04:34:37 AM

Title: Tacho cable clamp
Post by: Athame57 on August 12, 2021, 04:34:37 AM
Determined to replace the missing bits on my bike I notice I do not have a Tacho cable clamp, before I go out of my way to get one, does anyone know where it actually goes? Exploded diagrams are not helpful!  ;D
Title: Re: Tacho cable clamp
Post by: Bryanj on August 12, 2021, 07:05:07 AM
From memory it bolts on one of the horn mounting bolts
Title: Re: Tacho cable clamp
Post by: TrickyMicky on August 12, 2021, 08:16:49 AM
ANY help?
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 08:33:01 AM
Determined to replace the missing bits on my bike I notice I do not have a Tacho cable clamp, before I go out of my way to get one, does anyone know where it actually goes? Exploded diagrams are not helpful!  ;D

Do you have a part number for that mine is missing too?
Title: Re: Tacho cable clamp
Post by: Nurse Julie on August 12, 2021, 08:43:04 AM
I'm sure they don't have them fitted as standard on the 400/4. 500/550 yes, but not the 400.
Edit.. It may depend on which of the 2 options of horn fitted. CMSNL don't show it for the F2, Yamiya do show it but not specifically for the F2. The horn that does have it, the part number has been superseded to a 500 part number.
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 10:06:02 AM
I'm sure they don't have them fitted as standard on the 400/4. 500/550 yes, but not the 400.
Edit.. It may depend on which of the 2 options of horn fitted. CMSNL don't show it for the F2, Yamiya do show it but not specifically for the F2. The horn that does have it, the part number has been superseded to a 500 part number.

The one listed in the parts manual is 22872-356-000 I don't have that one either  as my Horn was missing.
The 500/550 looks a better design - no doubt expensive.
Title: Re: Tacho cable clamp
Post by: Athame57 on August 12, 2021, 10:42:01 AM
ANY help?
It might be, but with my horn going sideways I see a bodge brewing!  ::)
Title: Re: Tacho cable clamp
Post by: paul G on August 12, 2021, 10:59:38 AM
As previously stated not fitted on the 400-4 as the horn is sideways.
Was fitted on my 550 K3
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 11:57:42 AM
Cable Guide 50462-300-010 on the DS site - for front facing horns only presumably - not daft money either at £8.04
Title: Re: Tacho cable clamp
Post by: Deano400 on August 12, 2021, 12:01:08 PM
I have this parts list. The quality is not great but it shows the different horn and clip arrangements along with the country code. Not sure whether I can upload but will give it a try.
Title: Re: Tacho cable clamp
Post by: Athame57 on August 12, 2021, 12:42:37 PM
Cable Guide 50462-300-010 on the DS site - for front facing horns only presumably - not daft money either at £8.04
On Ebay for £14.00 ...omg! https://www.ebay.co.uk/itm/202505528552?epid=1915959044&hash=item2f264524e8:g:iCgAAOSw5tNb8B8n
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 12:49:07 PM
I have this parts list. The quality is not great but it shows the different horn and clip arrangements along with the country code. Not sure whether I can upload but will give it a try.

For some reason if you try to paste / copy a page you end up with the full manual as in your case - weird or what.
Title: Re: Tacho cable clamp
Post by: Deano400 on August 12, 2021, 01:30:33 PM
You can split the document into pages using PDFSAM (it's free to download) or if you want a partial page just use Snipping Tool.
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 03:33:55 PM
You can split the document into pages using PDFSAM (it's free to download) or if you want a partial page just use Snipping Tool.

Sounds like a partial DIY vasectomy.
Title: Re: Tacho cable clamp
Post by: Athame57 on August 12, 2021, 05:12:12 PM

Sounds like a partial DIY vasectomy.
....scalpel.....scissors ....tacho clamp  :-X
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 12, 2021, 09:07:12 PM

Sounds like a partial DIY vasectomy.
....scalpel.....scissors ....tacho clamp  :-X
Don't forget the snipping tool.
Title: Re: Tacho cable clamp
Post by: boilermaker1 on August 12, 2021, 09:35:20 PM
This is the type fitted to my 400F
Title: Re: Tacho cable clamp
Post by: McCabe-Thiele (Ted) on August 13, 2021, 12:27:07 PM
This is the type fitted to my 400F

That looks like the original one 22872-356-000.
SimplePortal 2.3.5 © 2008-2012, SimplePortal