« previous next »
Pages: [1]   Go Down

Author Topic: Oil pickup question  (Read 2585 times)

Offline Mr-Gear

  • SOHC Associate
  • Posts: 71
    • View Profile
Oil pickup question
« on: May 18, 2016, 09:17:46 AM »
Hello good people,

Just a quick question regarding the oil pickup in a cb400f.

What is the function of the spring that is inserted between the oil pick up and the casing? is it critical? Mine is missing for some reason.

Thanks, Ryan
Logged

Offline Orcade-Ian

  • SOHC Master
  • Posts: 1362
    • View Profile
    • Older Vehicle Web
Re: Oil pickup question
« Reply #1 on: May 18, 2016, 12:43:39 PM »
If you are referring to the spring which fits between the strainer cone and the lower engine case, it's there to ensure that the strainer is always in good contact with the metal plate screwed to the sump pan.  This means that any large particles are trapped by the strainer and can't get between the strainer and the wide end of the cone and into the oil pump.  Part number is 15157-333-000

David Silver or Steve at 400/4 parts should be able to help - same part as 350/4 too
Ian
Logged
1953 BSA Golden Flash 650 - still a basket case
1960 Norton Model 50 Featherbed 350
1960 Ducati Elite 200 (nearing completion)
1972 Honda CB 350/4
1975 Honda CB 550/4 F1
1976 Honda CB 400/4 F1
2020 Honda C125 Super Cub
2026 Honda ADV 350

Offline Chris400F

  • SOHC Master
  • Posts: 1013
    • View Profile
Re: Oil pickup question
« Reply #2 on: May 18, 2016, 03:50:20 PM »
Steve has a pickup complete with spring listed at the moment.
His site is at http://www.400fourbits.co.uk/.
Logged
Pages: [1]   Go Up
« previous next »