SOHC.co.uk Forums > CB750

spark plug removal

(1/2) > >>

sohc bob:
hi all I'm after doing a plug change on my 750 f2, is there a tool specific to remove the centre plugs or could I get by using an 18mm box spanner which I need to obtain I can remove the outer 2 using an 18mm long reach socket but no good on pots 2 and 3

cheers bob

hairygit:
If you have the correct size box spanner, use it! That is basically what was in the original toolkit! ;D

Johnwebley:
echoing what Hairy said,

  well worth getting the correct plug spanner,

 think David Silver has copies,if you can't get anywere else

K2-K6:
I've for years used the original Honda box type spanner for these and they can be difficult if the threads are at all tight.

Recently bought a pass through (hollow extension shaft and ratchet)  socket set from Clahs Olsen shop,  one of their own brand "Co Craft" sets which is the best thing I've yet found to get to all the plugs.

It's also designed to flank drive bolts so will accommodate various states of rusty / knackered bolts under old cars etc. One of the best tools I've bought in a long time,  my family are getting fed up with me telling them what I've undone with it.

Johnwebley:

--- Quote from: K2-K6 on October 12, 2016, 09:49:28 PM ---I've for years used the original Honda box type spanner for these and they can be difficult if the threads are at all tight.

Recently bought a pass through (hollow extension shaft and ratchet)  socket set from Clahs Olsen shop,  one of their own brand "Co Craft" sets which is the best thing I've yet found to get to all the plugs.

It's also designed to flank drive bolts so will accommodate various states of rusty / knackered bolts under old cars etc. One of the best tools I've bought in a long time,  my family are getting fed up with me telling them what I've undone with it.

--- End quote ---


 it sounds good,do a link !!

 we can't miss out !!!

Navigation

[0] Message Index

[#] Next page