SOHC.co.uk Forums > CB750

F2 barrels

<< < (2/2)

Bryanj:
Isnt the oil feed/return path from the rockers different on the F2, hence the domed head nuts and copper washers

Spitfire:
Found this in my notes from the US site

First, the 77/78F2/3 heads shared a common head drain back hole which early K,F and late K heads did not.
This eliminated the middle drain back holes in the F2/3 heads.
The 4 studs next to the eliminated drain back holes require cap nuts and copper sealing washers on the F2/3 head only.

The late F2/3, 77/78 cylinders CAN accommodate the knock pins(or dowels) and the rubber gaskets which allows you to run these early/late K and earlyF/F1(75/76) heads.

Here's the full article which also goes into using K barrels with an F2 head
http://forums.sohc4.net/index.php?topic=99165.msg1105716#msg1105716


Cheers

Dennis

Greebo:

--- Quote from: yozzer74 on November 26, 2016, 08:52:08 PM ---Hi quick question can you use any barrels on a f2 or do they have there own barrels

--- End quote ---

 Steve or Pete are the 2 men to answer this one ...

Navigation

[0] Message Index

[*] Previous page