Fuel tap leaking

[Niko]

Hi...mine is a 20mm thread job. With two outlets
Inside is a little nylon cone....

How do I stop it leaking....or how do I replace.

It's driving me nuts and wrecking my floor.
My house smells like a bp garage


Sent from my iPad using Tapatalk

[kevski]

Buy a new one, or don't put petrol in it.

[royhall]

Buy a new one, or don't put petrol in it.

[hairygit]

For the 750F1 which uses a similar design of tap, albeit with a single outlet, Honda do a repair kit, which has a new nylon mesh cone and the large rubber washer that seals the joint between the tap and tank. The washer is sadly not available as a separate item, only in the kit, which is not particularly cheap.

[Niko]

For the 750F1 which uses a similar design of tap, albeit with a single outlet, Honda do a repair kit, which has a new nylon mesh cone and the large rubber washer that seals the joint between the tap and tank. The washer is sadly not available as a separate item, only in the kit, which is not particularly cheap.

Do you have a link please...

Sent from my SM-G935F using Tapatalk

[Niko]

Buy a new one, or don't put petrol in it.

....tried not putting petrol in...but it's a bugger to start...lol

Sent from my SM-G935F using Tapatalk

[hairygit]

Try this...https://www.davidsilverspares.co.uk/CB550F1-SUPER-SPORT-1976/part_5058/    Is the washer what you need?

[Trigger]

Are you on commission from Sliver, Hairy

[hairygit]

Are you on commission from Sliver, Hairy

  No Trig, unlike you, I have no issues buying from him, He has invested a lot of money in getting replacement parts made (ie  750F1 caliper bodies) that are otherwise unobtainable and would keep an otherwise good bike off the road!

[Niko]

Cheers....i think the cone is worn

Sent from my SM-G935F using Tapatalk

[Niko]

Got one today from d and k....17 quid......and it doesn't leak!


Sent from my iPad using Tapatalk