« previous next »
Pages: [1]   Go Down

Author Topic: Fork Cases  (Read 2758 times)

Offline Mr-Gear

  • SOHC Associate
  • Posts: 71
    • View Profile
Fork Cases
« on: September 21, 2017, 02:34:13 PM »
Hi,

I'm toying with the idea of anodising the aluminium fork lowers on my cb400f.

Is it possible to safely remove the Studs on the bottom and the one on the side? Are these press fit or threaded?

Thanks
Logged

Offline Orcade-Ian

  • SOHC Master
  • Posts: 1362
    • View Profile
    • Older Vehicle Web
Re: Fork Cases
« Reply #1 on: September 21, 2017, 03:51:56 PM »
They are all threaded into the leg - I removed mine to zinc plate them and they all came out without a problem but if they look corroded in, it would be best to give them a good soak in penetrating fluid first.
Ian
Logged
1953 BSA Golden Flash 650 - still a basket case
1960 Norton Model 50 Featherbed 350
1960 Ducati Elite 200 (nearing completion)
1972 Honda CB 350/4
1975 Honda CB 550/4 F1
1976 Honda CB 400/4 F1
2020 Honda C125 Super Cub
2026 Honda ADV 350

Offline Mr-Gear

  • SOHC Associate
  • Posts: 71
    • View Profile
Re: Fork Cases
« Reply #2 on: September 21, 2017, 04:42:21 PM »
Thanks Ian,

How did you remove them, with heat, penetrating oil and the ol' double nut technique?
Logged

Offline Orcade-Ian

  • SOHC Master
  • Posts: 1362
    • View Profile
    • Older Vehicle Web
Re: Fork Cases
« Reply #3 on: September 21, 2017, 05:25:52 PM »
Hi,
I did heat the fork ends and then doubled me nuts!
Ian
Logged
1953 BSA Golden Flash 650 - still a basket case
1960 Norton Model 50 Featherbed 350
1960 Ducati Elite 200 (nearing completion)
1972 Honda CB 350/4
1975 Honda CB 550/4 F1
1976 Honda CB 400/4 F1
2020 Honda C125 Super Cub
2026 Honda ADV 350
Pages: [1]   Go Up
« previous next »