Sticker Placement

[thegreatpan]

Just adding the finishing touches to my 1977 400 Four. Please could someone advise me of the correct placement for the following stickers.
i. Tyre Size and Pressures
ii. Preserve Nature where a crash helmet.

TIA

[Nurse Julie]

The tyre size and pressure goes on the chainguard. Not sure about the preserve life as I haven't got one on my 400 but a guess would be on the tank somewhere. EDIT. I seem to recall the preserve life sticker goes on the centre line between the fuel filler cap and the headstock.

[thegreatpan]

Thanks Julie

[petermigreen]

These should help





What about some photos of your finished bike
Peter

[Nurse Julie]

Well done Peter, I was trying to get a photo of mine showing the sticker on the chain guard but, too many other bikes in the way!!!

[thegreatpan]

Thanks Peter, yes I'll put some on if I can work out how lol

[thegreatpan]

Pictures now in the Gallery, the bike is now finished, and laid up for the winter.

[paul G]

Have you got these two as well one on the frame and the other on the swinging arm.

[thegreatpan]

Err nope, I take it the one on the frame is a breather route? Is the one on the swing arm regarding the pillion footrests, if so my later model won't need it. 

[mike the bike]

Your 400 looks great Paul, as if you went back to the 70s in a time machine and stumped up £699 for a new one.

[Laverda Dave]

Lovely looking bike, the yellow ones were the best colour. Where did you get the rear sprocket with the combined chain guard from, I've been trying to find one of those for two years!

[thegreatpan]

The sprocket was on the bike when I bought it, the bike had been restored in 1998, and not run since, bodywork was fine, however fuel, and front brake systems needed a lot of work, but she's running well now. Regrettably I had to go for DSS ignition switch as the key was jammed in the original 😣. I don't know if there's a way to refurb the switch?

[paul G]

Err nope, I take it the one on the frame is a breather route? Is the one on the swing arm regarding the pillion footrests, if so my later model won't need it.

The one on the frame is the battery breather rout and the one on the swing arm is abour the exhaust 

[paul G]

Your 400 looks great Paul, as if you went back to the 70s in a time machine and stumped up £699 for a new one.

I wish but don't tell the wife.
As the saying goes, when I die I hope my wife does not sell the bikes for how much I told her they cost me

[Seabeowner]

Great looking bike Paul. Inflation tells me that £699 is now about £5400 if that makes you feel any better.
Regarding the stickers, I have the exhaust warning on my 500 and have been told that it was only fitted to USA and Canada models and that seems to stack up with a parts list. (A and CM area codes) Anyone remember?