Other Stuff > Misc / Open
Slight modification to ASH's Ignition coil fix
Erny:
Yes, I know, it is decribed at the beginning if this thread ;)
BTW
When i tried to measure resistance of secondary coil, I was unable to measure - not even sure if method was OK - I suppose one end of coil is end of HT lead and another is one of primary wires, correct?
I tried all, I mean end of HT lead ( I tried with and without cap and plug) and other to black or yellow (had coil 2-3 for test). Each time infinite resistance... but coil works, not sure if perfect but works...
What I did wrong?
Bryanj:
Secondary resistance is from one ht lead to the other on a rwin lead coil as fitted to the fours
Erny:
aaaa to the other HT lead? The only option I did not think about!!! ::)
paul G:
--- Quote from: Erny on August 06, 2019, 01:08:18 PM ---Yes, I know, it is decribed at the beginning if this thread ;)
BTW
When i tried to measure resistance of secondary coil, I was unable to measure - not even sure if method was OK - I suppose one end of coil is end of HT lead and another is one of primary wires, correct?
I tried all, I mean end of HT lead ( I tried with and without cap and plug) and other to black or yellow (had coil 2-3 for test). Each time infinite resistance... but coil works, not sure if perfect but works...
What I did wrong?
--- End quote ---
;D didn't read back that far !
AshimotoK0:
Here is the 7mm HT Lead that Trigger, Julie & myself have used.
https://www.sparkplugs.co.uk/beru-ignition-cable-7mm-pvc
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version