SOHC.co.uk Forums > CB750

Recommended Compression Gauge for cb750

<< < (2/3) > >>

philward:

--- Quote from: Trigger on December 07, 2018, 02:40:20 PM ---Make your own or use your finger  ;D ;D ;D

--- End quote ---
Can you make a compression gauge with the tools I have Graham? (i.e. a hammer and adjustable spanner)

Sent from my Moto G (5) using Tapatalk

Trigger:
I am not a fan of new tools Phil, i prefer to buy good second hand which are made a lot better and last. Also not a big fan of Snip on tools, but did spot this >>> https://www.ebay.co.uk/itm/Snap-On-Tools-2-screwdrivers-1-socket-1-Cylinder-Compression-Tester-250-PSI/223237270932?hash=item33f9fa6d94:g:RUYAAOSw5oxb4zI4:rk:11:pf:0

philward:
Just spotted this set
https://www.ebay.co.uk/itm/Warrior-Motorcycle-Bike-10mm-12mm-14mm-3-In-1-Engine-Compression-Tester/302856615806?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D2b7c3ce76e744b8d8aaae21b8a1e150c%26pid%3D100290%26rk%3D2%26rkt%3D4%26sd%3D361312564800%26itm%3D302856615806&_trksid=p2060778.c100290.m3507
Anybody used 'Rotherwald' tools before? (they seem to do a wide range of bike tools)

Rob62:
This has to be one of the most established, reliable choices

https://www.ebay.co.uk/itm/Gunson-G4101-Hi-Gauge-Compression-Tester/401643779367?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D20151005190705%26meid%3Db11110f33ad94195958da31a28c465b1%26pid%3D100506%26rk%3D1%26rkt%3D1%26%26itm%3D401643779367&_trksid=p2045573.c100506.m3226

philward:
Thanks Rob - I'm sure the plugs on the 750 are 12mm though? The Gunsons is 14mm & 18mm

Sent from my Moto G (5) using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page