« previous next »
Pages: [1]   Go Down

Author Topic: CB350/4 tank onto a 400/4  (Read 8494 times)

Offline Andych

  • SOHC Member
  • Posts: 165
    • View Profile
CB350/4 tank onto a 400/4
« on: December 22, 2018, 12:37:40 PM »
Is there much of a difference visually between the 350/4 and 400/4 tanks?
My 400/4 tank is compressed a little at the front (on top) and I am not sure if it is easily repairable so I have been keeping my eyes open for a replacement but they very rarely show up in Australia.
The 350/4 tank listed below looks to be in pretty good condition and is is a good price but I am not sure how it will look on the bike.

I know anyone who knows about the SOHC 4's will immediately spot it but it might be a good alternative while I either find a way to fix my original tank or source a good one. I am not overly keen to buy an aftermarket one.. I am just not sure of the fit and finish and they all seem to h=only have a 14mm petcock outlet.
https://www.ebay.com.au/itm/Honda-1973-CB350-four-fuel-tank-Candy-Bacchus-Green/143053403659?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
Logged
1975 CB400 - Project
1978 Yamaha SRX250 - Project

Offline AshimotoK0

  • Grogu
  • *
  • Posts: 7849
  • Mad Scientist.... more power Igor ! Ù©(̾๏̮̮̃̾๏̃̾)Û¶
    • View Profile
Re: CB350/4 tank onto a 400/4
« Reply #1 on: December 22, 2018, 12:53:49 PM »
Only seen it the other way round ... seat fitment looks a bit suspect.

[ Guests cannot view attachments ]
Logged
“Alright friends, you have seen the heavy groups, now you will see morning maniac music. Believe me, yeah. It’s a new dawn.” Grace Slick, Woodstock '69 .. In the year of the Sandcast.

Offline gtmdriver

  • SOHC Expert
  • Posts: 266
    • View Profile
Re: CB350/4 tank onto a 400/4
« Reply #2 on: December 23, 2018, 10:18:04 AM »
They are very different in shape but that doesn't mean that it won't fit. The tank/seat relationship may be a bit suspect.
Logged
Pages: [1]   Go Up
« previous next »