SOHC.co.uk Forums > Project Board

Alternative wiring connectors for multi junctions

<< < (3/3)

71 V12:
Well I ordered 2 and 3 way 2.8mm mini connectors and changed all of the multi-way bullets to these connectors. Having the correct crimping tool is essential and the terminals are fiddly particularly when crimping two wires. But like all things a bit of practice and you soon get the technique.

I am really pleased with the result, nice secure latched connectors, much more secure than the bullets and all electrics fully functioning. Hopefully long term reliability assured.

BigAl (Alan):
Very nice work, you did well to get 2 wires into a 2.8mm terminal.

Excellent detail work on the K4, just curious why the earlier 'k' indicator stems are fitted?

Alan

71 V12:
Hi Al,

Thank you, it was the feedback on the forum that led to me to this solution, so as usual an invaluable resource and tanks again for all the advice👍

I actually did realise the indicator stem are the earlier type. What is the difference?

Cheers

Kevin

BigAl (Alan):
Hi Kevin,

The USA models (K3 onward) had a slightly longer indicator stem with a 'tapered' profile (image attached off my bike)

Alan

Navigation

[0] Message Index

[*] Previous page