SOHC.co.uk Forums > CB750

Broken bolts in cylinder head....help!!

<< < (2/3) > >>

admin:
Well I'm please that was resolved, it just goes to show that if you ask the right questions we all get a result,

Thank you every one.

JP, SammyB has requested that you send your address in an email to me at webmaster@honda-sohc.co.uk and I'll pass it on.

Thanks again every one. and Keep Posting

Admin

[JP]:
Once again..thanks to everyone!!!

I'll keep everyone updated with the project....which for someone like me that didn't know a thing about bike mechanics 1 year ago...I think it's going pretty well.

Admin, about the link, can I add it to my webpage?

admin:
Yep add the link, and send me the address to your site and I'll add to our links too.

[JP]:
:S  can

JonnyB:
I don't use the torque wrench for the smaller bolts,I bought one from Halfords but found the \"click action\" was so soft low down, that I missed it.

For small stuff, I use the 1/8th turn method, you tightnen up with as normal, then give it an extra 1/8th of a turn to tighten it up.

To remove a half snapped stud or bolt, you need a stud extractor. something like this

http://www.drapertools-online.com:8080/b2c/b2citmdsp.pgm?pp_skmno=14156

Which bolt have you snapped?, one of the ones holding the cam carriers down

Navigation

[0] Message Index

[#] Next page

[*] Previous page