started my CB750K7 resto

[tworiversuk]

Hi boys and girls,
just started my resto of the CB750K7 I bought 6 months ago, when I figure out how to put pictures in my posts I will do so.I will I am sure need your help along the way, I have sent the carbs off to be stripped and vapour blasted and rebuilt with brand new internals,stripped all the oil tank and lines,left side electric panel and battery tray,seat ect off, tonight the engine will come out ( I hope ) made up my engine stand as seen on this site, ready for the paint job, so come alomg with me and see how I get on
Mike in Devon ( UK )

[MIKE550/4]

i will be watching, best of luck

Mike  in Northants 

ps pics way i do it, photobucket.com

upload your pics to photobucket , click on generate the links, then copy that link into your message on here , once you've done it a couple of time dead easy

[mick]

Good luck with your rebuild i'll be watching to  , remember if you get stuck just ask someone will know how to help you, cheers Mick.

[SteveD CB500K0]

There's a FAQ here on the various options for posting pictures:

http://forums.sohc4.net/index.php?topic=14605.msg93296#msg93296

[tworiversuk]

well all stripped out and 4 days later the powder coating has arrived back, loverly job, any idea's as to the paint to use on the engine? and has anyone a seat trim for sale must be perfect no scratches
Mike

[SteveD CB500K0]

I have found that Halfords Aluminium Engine Paint is a good match for the Honda engine cases.

[Andy1976]

Jim Morley of JME Engineering (Linconshire) recommended an aerosol paint to me a few months ago but I can't remember what it's called. you can give him a ring if you like on 07984388405 ore-mail
jim-morley@tiscali.co.uk

Good luck

Andy

[tworiversuk]

Hi Guys,
painted the engine with 2 coats of simmoniz VHT silver, looks the dogs boll**ks, spent the afternoon polishing the cases, tappet cover and altenator cover done so far, far easier when you shotblast with glass beads,one question which side does the earth strap go to ,the brake switch side or tuther?found a supplier for the push nuts that keep the seat chrome rail on, stainless as well,

[Seamus]

Hi Mike
Nice to read your rebuild story. Can you tell me where you got your wheels built please? I need to get my front done as the PO had it rebuilt with stainless spokes and the old rim. Really needs a new rim.

Thanks

Seamus

[tworiversuk]

Hi,
well you can get a rim from silvers, I had my wheels rebuilt using a new rim from Silvers and s/steel spokes ,just because there is no problems with rust , the wheels was rebuilt by http://www.devonrimcompany.com/classicrims.htm# from devon

[Seamus]

I guess that you have looked at dave Silvers site, but have you tried http://www.cmsnl.com/