SOHC.co.uk Forums > CB750
Fitting standard airbox - best method
philward:
I'm going to fit the airbox and carbs to the K6 project I'm building (having welded the airbox frame brackets back on that the previous owner ground off!). I remember having trouble juggling them onto my standard K2 but as it was back in 2014 ish, can't remember what was the best method and thought I would ask the experts to avoid mucho causing and swearing in this scorchio weather (sorry, went all Spanish there - must be the weather!)
Nurse Julie:
Try it on a CB400 /500 or 550, you will be swearing a lot more fitting them than on a CB750 Phil 🤣🤣🤣
philward:
--- Quote from: Nurse Julie on July 26, 2019, 10:39:09 PM ---Try it on a CB400 /500 or 550, you will be swearing a lot more fitting them than on a CB750 Phil 🤣🤣🤣
--- End quote ---
Factor in minding 4 and 7 year old Grandsons tomorrow and the stress levels are in excess of 500 fitment stress Julie!
MCTID:
Get the Grandsons to help.........they will either amaze you with their dexterity and ingenuity, or you will amaze them with your cursing and swearing proficiency ! LOL.
philward:
I think the latter Alan! (as the younger one is hyper and the older one is autistic) - wish me luck!
Come on experts - any tips before I start - I just remember it being awkward and might have being my technique
Navigation
[0] Message Index
[#] Next page
Go to full version