SOHC.co.uk Forums > CB750

Fitting standard airbox - best method

<< < (2/2)

Trigger:
Its easy Phil, Inlet rubbers on first ( a little silicone spray helps) Then the carbs and then the airbox top (Don't tighten up the two air box bolts until last  ;) ;)

philward:
Thanks Graham - no chance of tightening up the airbox bolts - there's no holes drilled in the brackets yet (welded on blank bracket to ensure the I get airbox in right position - should be near enough though as used measurements from my K2)

philward:
All done with no trouble at all - think I may have fitted complete airbox when I built up K2 years ago in my naivety

Sent from my Moto G (5) using Tapatalk

Trigger:
See, you old boys worry too much  ;)

Navigation

[0] Message Index

[*] Previous page