Author Topic: Fitting standard airbox - best method  (Read 2327 times)

Offline Phil Ward (RIP)

  • SOHC Jedi
  • Posts: 2765
    • View Profile
Fitting standard airbox - best method
« on: July 26, 2019, 10:18:18 PM »
I'm going to fit the airbox and carbs to the K6 project I'm building (having welded the airbox frame brackets back on that the previous owner ground off!). I remember having trouble juggling them onto my standard K2 but as it was back in 2014 ish, can't remember what was the best method and thought I would ask the experts to avoid mucho causing and swearing in this scorchio weather (sorry, went all Spanish there - must be the weather!)
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8758
    • View Profile
Re: Fitting standard airbox - best method
« Reply #1 on: July 26, 2019, 10:39:09 PM »
Try it on a CB400 /500 or 550, you will be swearing a lot more fitting them than on a CB750 Phil 🤣🤣🤣
LINK TO MY EBAY PAGE. As many of you know already, I give discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Phil Ward (RIP)

  • SOHC Jedi
  • Posts: 2765
    • View Profile
Re: Fitting standard airbox - best method
« Reply #2 on: July 26, 2019, 11:37:16 PM »
Try it on a CB400 /500 or 550, you will be swearing a lot more fitting them than on a CB750 Phil 🤣🤣🤣
Factor in minding 4 and 7 year old Grandsons tomorrow and the stress levels are in excess of 500 fitment stress Julie!
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline MCTID

  • SOHC Pro
  • Posts: 614
    • View Profile
Re: Fitting standard airbox - best method
« Reply #3 on: July 27, 2019, 07:38:48 AM »
Get the Grandsons to help.........they will either amaze you with their dexterity and ingenuity, or you will amaze them with your cursing and swearing proficiency ! LOL.
Now: 2008 CB1300S, CB750K4, 1970 Bonneville. Various other 1960's 650 Triumph T120's/ TR6's/ TR6C's (all in bits...many, many bits unfortunately). Previous: 2007 CB600FA, 1976 CB500 Four. BMW F800ST. GS750E. ZZR1100. CB1300 (2). ZXR1200S. VFR800. CB750 Nighthawk. CX500. XS500 Yam. Suzuki GT500. BSA A10. Various Lambrettas. Zundapp Bella (honest).

Offline Phil Ward (RIP)

  • SOHC Jedi
  • Posts: 2765
    • View Profile
Re: Fitting standard airbox - best method
« Reply #4 on: July 27, 2019, 10:16:58 AM »
I think the latter Alan! (as the younger one is hyper and the older one is autistic) - wish me luck!
Come on experts - any tips before I start - I just remember it being awkward and might have being my technique
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Trigger

  • Grogu
  • *
  • Posts: 8379
  • Engines built on reputation, not advertising.
    • View Profile
Re: Fitting standard airbox - best method
« Reply #5 on: July 27, 2019, 10:49:47 AM »
Its easy Phil, Inlet rubbers on first ( a little silicone spray helps) Then the carbs and then the airbox top (Don't tighten up the two air box bolts until last  ;) ;)

Offline Phil Ward (RIP)

  • SOHC Jedi
  • Posts: 2765
    • View Profile
Re: Fitting standard airbox - best method
« Reply #6 on: July 27, 2019, 12:10:46 PM »
Thanks Graham - no chance of tightening up the airbox bolts - there's no holes drilled in the brackets yet (welded on blank bracket to ensure the I get airbox in right position - should be near enough though as used measurements from my K2)
Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Phil Ward (RIP)

  • SOHC Jedi
  • Posts: 2765
    • View Profile
Re: Fitting standard airbox - best method
« Reply #7 on: July 28, 2019, 08:15:16 AM »
All done with no trouble at all - think I may have fitted complete airbox when I built up K2 years ago in my naivety

Sent from my Moto G (5) using Tapatalk

Current Bikes:-
Honda CB750K2 (1975)
Honda CB500K2 (12/1972)
Honda CR750 Replica (1972)
Honda CB350K0 (1969)
Kawasaki ZZR1100D3 (1995)
Kawasaki ZZR250 (1990) Project (Going on eBay ASAP)

Offline Trigger

  • Grogu
  • *
  • Posts: 8379
  • Engines built on reputation, not advertising.
    • View Profile
Re: Fitting standard airbox - best method
« Reply #8 on: July 28, 2019, 08:55:48 PM »
See, you old boys worry too much  ;)