SOHC.co.uk Forums > CB750

Bottom hanger bolt.

(1/2) > >>

brodsord:
Hi all,

Can anyone tell me if the bottom engine hanger bolt for a CB750 f2 is longer than the same bolt for a CB750 k5 ?
Also is there difference in the long front engine hanger bolt between those two models?
Many thanks


Sent from my iPhone using Tapatalk

Erny:
I do not have personal experience, but I would look at spare parts catalogue to check first. Shall be clearly visible there

Odoslané z SM-G930F pomocou Tapatalku

Trigger:
I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2  ;)

brodsord:

--- Quote from: Trigger on January 20, 2020, 08:14:01 PM ---I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2  ;)

--- End quote ---
Thanks very much Trigger.

I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?


Sent from my iPhone using Tapatalk

brodsord:

--- Quote from: Erny on January 20, 2020, 07:30:57 PM ---I do not have personal experience, but I would look at spare parts catalogue to check first. Shall be clearly visible there

Odoslané z SM-G930F pomocou Tapatalku

--- End quote ---
Thanks Erny


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page