SOHC.co.uk Forums > CB750
UK Plate Bracket?
Erny:
--- Quote from: Rookster on May 02, 2020, 07:33:52 PM ---I picked up what I believe is the UK Plate Bracket for the CB750. There aren't any holes in the bracket to mount a plate. How would the plate originally been mounted to this bracket? Is as simple as drill a few holes in it or are they special clips?
Thanks
Scott
--- End quote ---
I think this one is from CB500/550.
I recently obtained the same, from CB550F european version (proven). It fits smaller tail light, I want to replace my big light with bracket on CB550K1 (us version). But before sent for chroming. I had there 3 drilled holes for license plate that will be welded. I'll find another way to fit licence plate w/o drilling.
Trigger:
Erny, the one in your picture is 550 UK but, it was also used on the 500 from the middle of 1974. Maybe down to who was supplying Honda.
Bryan, not sure what you mean by rib. Please explain ? The part number for the 500 and 750K2 were the same P/N 84701323600B
AshimotoK0:
--- Quote from: Trigger on May 03, 2020, 09:30:18 AM ---
Bryan, not sure what you mean by rib. Please explain ? The part number for the 500 and 750K2 were the same P/N 84701323600B
--- End quote ---
The CB250k type has a rib pressed into the top face.
Trigger:
--- Quote from: AshimotoK0 on May 03, 2020, 09:44:26 AM ---
--- Quote from: Trigger on May 03, 2020, 09:30:18 AM ---
Bryan, not sure what you mean by rib. Please explain ? The part number for the 500 and 750K2 were the same P/N 84701323600B
--- End quote ---
The CB250k type has a rib pressed into the top face.
--- End quote ---
Got the rib bit now. 3 void ;)
Rookster:
The one I have definitely has a rib on the top. I didn't pay much for it. I may still try to use it with some modification. These pictures show the the rib. I'm attempting to use the smaller oval taillight. Any other thoughts on what this bracket is?
Thanks for the help
Scott
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version