SOHC.co.uk Forums > CB350/400

Wires for horn

<< < (2/2)

Athame57:
Now, my after market horn I have to replace only has one 'bayonet' on it, the replacement has two. My switch gear is new stuff from DSS.

cliff7:
I have a 1978 F2. Horn on mine has 2 terminals. One goes to horn switch (Light Green on mine), maybe brown on yours and other goes to earth as Bryanj says. I'd check if your brown goes live when switch is pushed.

Bryanj:
With only one terminal it would suggest that the horn earthed through the body, BUT this is only an educated guess.
If you don't have a multimeter to test for voltage connect a bulb test light between the wire you have and a decent earth, if the bulb lights when you press the button (with the ignition on!) you need to make a small lead to connect between a spade and a mounting bolt

Navigation

[0] Message Index

[*] Previous page