SPEEDO & REV COUNTER BEZELS

[Gromitdog]

 I discovered today when I went to fit some new instrument anti vibration rubbers that both my instrument bezels are not in the best of condition fact they look as if they are just RTV together  and they both appear to be missing the chrome / alloy band

Q1)     Am I right in saying that a UK MODEL CB550 k3 has green faced clocks
           speedo 120mph & Rev Count 11000 RPM ?
Q2)     1/2 way down the bezel there is a chrome / alloy band, Is this folded over band what   
           keeps the two half of the bezel together ?
Q3)     Is there a rubber seal that goes in between the 2 half's of the bezels

I like to try and source 2 x bezels  & 2x chrome bands new or 2nd hand Any advice or guidance please would be great to be able to try and sort this little problem out

Regards

Nigel
           

[Gromitdog]

Hi Ken

Thank you for your reply will have a look around for the grey ones unfortunately green seems the most popular colour for new / 2nd hand, I certainly need to get to the bottom of the bikes originality V5 DETAILS are

May 1977 is its reg date , colour is maroon , & it was sold to me as a K3 unfortunately its had 15+ owners so its going to be hard to work out what's been done to poor old "Muttley" (bikes Nickmane  )

We will get to the bottom of it with every ones help on here

Rgds

Nigel

[Bryanj]

Cant help with bezels but happy to look in US id book if you send me full frame and engine numbers

[Gromitdog]

Hi Ken

Thank you for your help with this would it be ok if I email you the Engine and Frame number as I don't won't to up them up on here for security reasons if that is ok with you,

Are all the Honda CB tacos & Speedo cases / bezels the same size Would a Honda CB 200 bezel fit  ??

Regards

Nigel

[SteveW]

I found these the other day, need a bezel for the missus's 1964 Vespa V90 speedo.

All different sizes.

https://www.autoelectricalspares.co.uk/bezels-glass--seals-for-smiths--lucas--jaeger-gauges-68-c.asp

[Bryanj]

Email is ok or pm is non visible. Back to nights tomorrow so give a bit of time to look it up

[kent400]

The bands that secure the painted body to the base are stainless steel. Aluminium replacements are available from a forum  sponsor www.cb750faces.com there is a rubber seal between the painted body and the base. These seals are also available from the same supplier.   

[kent400]

Here's an image of the seal in question, between the painted body, inner body and the base.