SOHC.co.uk Forums > CB750
Engine full of fuel and seized up
PJM47:
--- Quote from: Bryanj on November 02, 2020, 08:51:51 AM ---Should you try the Hylomar a BIT is the important part!!!!
--- End quote ---
Ok noted. Or do we think I am better off not using any sealant at all? Opinions vary.
Bryanj:
Personalty I wouldn't as the damage is nowhere near he fire ring or an oilway
Trigger:
It was sealed OK before you took it apart without anything. I would never use any sealant on any gaskets as, the 750 is prone to the oil jet blocking with sealant and bang goes the top end ;)
What jets does the head have fitted ?
PJM47:
--- Quote from: Trigger on November 02, 2020, 05:23:16 PM ---It was sealed OK before you took it apart without anything. I would never use any sealant on any gaskets as, the 750 is prone to the oil jet blocking with sealant and bang goes the top end ;)
What jets does the head have fitted ?
--- End quote ---
Not sure, is this the jet you mean:
[ Guests cannot view attachments ]
Bryanj:
Thats the one, take it out and make sure the oilways are super clean, you should also fit 4 O rings, 2 at the jets and 2 in the blank recesses at other end of cam tower
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version