CB400F Parts Wanted

[CB400JAY]

I want to convert my 1975 CB400F from US spec turn signals to Euro spec. Looking for the front headlight/turn signal bracket, the rear stalks and the signals themselves.  Probably could use and older set of US signals, but need the Euro brackets.

Cheers

[Athame57]

Did you know David Silver Spares has them? https://www.davidsilverspares.co.uk/CB400F-SUPER-SPORT-FOUR/part_140265/

[SeanFD]

Have a look here:

https://www.400fourbits.co.uk/

[Deano400]

This guy's selling parts individually. Head light bracket in there (short indicator mounts).

https://www.ebay.co.uk/itm/HONDA-CB-400-FOUR-CB500-FOUR-HONDA-CLASSIC-PARTS-SPARES-BREAKING/174376119410?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[10tenmen]

Did you get a set of turn signals

[mike the bike]

Oooh nice.

[CB400JAY]

The price of new parts is just too much.  Have to keep searching for used Euro spec brackets.

[dickyta2]

I might have what you need? Sent you a pm.

[THUNDERDOWNUNDER]

Pity you don’t live Down Under . I just sold  75 400/4  with Spare engine for 500 quid .. mind you it was all in bits but I think most of it was there !

[Andych]

Damn that is cheap... A$900 to A41000......... over here on the East Coast 400/4's are probably double that and more, let alone with a spare engine... I am still slowly gathering bits for mine while I finish other projects... now if I could just find a half decent 400F exhaust (pipes only) I would have most of what I need.

[THUNDERDOWNUNDER]

Bugger , you won’t believe it but the bike was in Sydney for over a year . I got fed up with it sitting at my mates place in Blacktown so I put it on Gumtree and sold it to a guy over here in Perth . He paid the shipping so that knocked the price up for him . I have got an Original Four into one  set of pipes but they need a bit of braising. . Just put DSS set on my bike . Not as good as the originals but they look good .

[Andych]

Bugger..... I would have grabbed it if I had known... still I am at least not in trouble with SWAMBO because I bought "another" bike in bits
My exhaust was crushed on the outer pipe and had multiple large holes... so it was too far gone to even attempt to restore.
I have contemplated the Pattern pipes but havent made a decision yet... still away off starting the 400.. I have a modified Yamaha SRX250 (really a 350 now) that is almost finished and an SL125 in the mid stage... maybe over Christmas I will get them completed and start on the 400...

[THUNDERDOWNUNDER]

The set of pipes I took off where damaged on outer side and the splitter box has a hole or two. . My bike came with a DSS new exhaust system so I was lucky as he is asking over a grand (Pounds) for them . They are a pig to fit but you get there in the end . Good luck with your podject from WA .

[Lobo]

Andy... check your PMs - I may be able to help you out.
Simon

[SeanFD]

If Andy passes on those, can I have 2nd dibs?