« previous next »
Pages: [1]   Go Down

Author Topic: Chemical/electrical immersion anodise kits  (Read 6465 times)

Offline BigAl (Alan)

  • SOHC Pro
  • Posts: 579
  • Hope its sunny at the weekend
    • View Profile
    • www.alans-electrics.co.uk
Chemical/electrical immersion anodise kits
« on: October 07, 2009, 03:16:07 PM »
Hi everyone,

Has anyone bought and used one of  these kits, would welcome any advice. Some of the nuts/bolts/washers on my CB750 K4 are looking a bit tied

Thanks in advance

Alan
Logged
Current bikes:-
Honda CB750 K4 (1974) USA
Honda XL500S (1980) UK
Honda CD175 sloper (1968) UK
Honda CB1100A (2013) UK
www.alans-electrics.co.uk

Offline hector2800

  • SOHC Associate
  • Posts: 91
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #1 on: November 18, 2009, 03:40:03 PM »
Would be interested in that myself if anyone has any info.
Logged
Go on you know you want to

Offline Seamus

  • SOHC Pro
  • Posts: 741
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #2 on: November 18, 2009, 07:38:12 PM »
I must confess to having my engine bolts and a good few others re zinc plated at a local platers. These were just cleaned up using a flap wheel and delivered to the plater.
Came back looking great and only cost
Logged

Offline matthewmosse

  • SOHC Master
  • Posts: 2161
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #3 on: November 19, 2009, 09:35:03 AM »
A kit was detailed / featured in classic motorcycle mechanics, probly almost a year ago by now...........
Logged
Got a 500/4 with rust and a sidecar and loadsa bits. nice and original and been round the clock

Offline hector2800

  • SOHC Associate
  • Posts: 91
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #4 on: November 19, 2009, 04:15:41 PM »
This place looks as if it has every angle covered. http://www.caswellplating.com/kits/index.html
Didn't know there was that much stufff out there!!!!
Logged
Go on you know you want to

Offline hector2800

  • SOHC Associate
  • Posts: 91
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #5 on: November 19, 2009, 04:19:02 PM »
Bloody hell!!!!  I've just seen how much they cost. Might be looking for a local plater after all.
Logged
Go on you know you want to

Offline matthewmosse

  • SOHC Master
  • Posts: 2161
    • View Profile
Re: Chemical/electrical immersion anodise kits
« Reply #6 on: November 20, 2009, 10:41:53 AM »
Logged
Got a 500/4 with rust and a sidecar and loadsa bits. nice and original and been round the clock
Pages: [1]   Go Up
« previous next »