SOHC.co.uk Forums > CB350/400

Rubik's Cube question - 400/4 battery & air box ??

<< < (2/2)

McCabe-Thiele (Ted):
Thanks Julie I managed to separate the oval outlet pipe with a narrow paint scraper and a small lever without damaging anything.

I wonder if you can buy the small rubber pads/grommets shown in photo?
https://flic.kr/p/2k5c88X


.

taysidedragon:

--- Quote from: Macabethiele on November 10, 2020, 02:10:59 PM ---Thanks Julie I managed to separate the oval outlet pipe with a narrow paint scraper and a small lever without damaging anything.

I wonder if you can buy the small rubber pads/grommets shown in photo?
https://flic.kr/p/2k5c88X

They are available at extortionate prices. Cut your own from thin rubber sheet if not worried about originality.


.

--- End quote ---

McCabe-Thiele (Ted):

--- Quote from: taysidedragon on November 10, 2020, 04:56:33 PM ---
--- Quote from: Macabethiele on November 10, 2020, 02:10:59 PM ---Thanks Julie I managed to separate the oval outlet pipe with a narrow paint scraper and a small lever without damaging anything.

I wonder if you can buy the small rubber pads/grommets shown in photo?
https://flic.kr/p/2k5c88X

They are available at extortionate prices. Cut your own from thin rubber sheet if not worried about originality.


.

--- End quote ---

--- End quote ---

I have noticed that rubber grommets and items such as fuel tank rubbers do seem very expensive. I have some self adhesive rubber pads that were really cheap that came from Poundland I will probably use these they will do the trick. You can't even see them when the battery is fitted. I'm not a purist as long as it does the job that's good enough for me. It matters not that they are square rather than round!

Navigation

[0] Message Index

[*] Previous page