« previous next »
Pages: [1]   Go Down

Author Topic: Front Brake Caliper Bracket  (Read 2046 times)

Offline waffey

  • SOHC Member
  • Posts: 192
    • View Profile
Front Brake Caliper Bracket
« on: November 22, 2020, 01:24:07 PM »
Hi,  me again!

I thought I would clean the front brake caliper bracket up. I cant take it apart. I don't think its threaded or is it. Is there a trick to parting the two pieces?

thanks in advance
Logged
Bikes:
Triumph Street Twin
Suzuki Address 110 Scooter
Suzuki TL1000s
BMW R1200GS LC
Honda CB400 F2 1977 (restoration underway)

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8718
    • View Profile
Re: Front Brake Caliper Bracket
« Reply #1 on: November 22, 2020, 01:29:30 PM »
Hold the bottom bit in the vice, heat the top bit and turn it. The O rings will need replacing. Before you take it apart, make sure there is no up and down movement in the arm.
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline waffey

  • SOHC Member
  • Posts: 192
    • View Profile
Re: Front Brake Caliper Bracket
« Reply #2 on: November 22, 2020, 01:32:27 PM »
thanks nurse Julie, I'll give it go. I didn't want to force it earlier.
Logged
Bikes:
Triumph Street Twin
Suzuki Address 110 Scooter
Suzuki TL1000s
BMW R1200GS LC
Honda CB400 F2 1977 (restoration underway)
Pages: [1]   Go Up
« previous next »