SOHC.co.uk Forums > CB500/550

CB550 F2 Vin Plate

(1/3) > >>

Sesman:
I’m about to send the frame for powder coat, but would be very grateful for some advice on removal and replacement of the vin plate. Having trawled the site, I presume it’s conventional to drill out the original rivets then replace with new. I can’t see replacement rivets on the DS site though.

Any advice on removal and replacement gratefully received as I’d like to avoid my usual procedure of cocking it up!

Bryanj:
Its also glued on so be carefull as they distort easily, i will look up the rivet part number later for you

Sesman:
Thanks, much appreciated. The gluing bit is interesting.

ST1100:
Yep, adhesive backing, either already "aged off" anyway, or use heat-gun to warm before removal...

P/N 90841-001-000 for the rivets IIRC...

Bryanj:
Thats the number described as "screw, rivet 15x5"

Navigation

[0] Message Index

[#] Next page