SOHC.co.uk Forums > CB350/400

"O" Ring and Seals list for CB400F Eng/trans - Is there a full list please ?

(1/3) > >>

400 Cafe Racer:
Hi guys, I am looking and wondering if there is a reference list to cover all the "O" rings and seals needed for the Engine Trans unit. I am trying not to make assumptions about what is included/ excluded in gasket sets etc, although there is a sealed bag full of "O" rings.

From all the rebuilds you have carried out between you, there is lot of experience of  Which things are included AND Which things need to be ordered seperately. There are odd things like the starter motor O ring etc I wanted to include

The bike I purchase recently has a few minor oil leaks to deal with, so I have decide to do a full strip and inspection so I know the full internal condition.

To have this info available woud be most helpful prior to ordering, also knowing best where they can be obtained and  which brands are reliable and those to avoid.

Cheers  ;)

Dennis

Deano400:
Hi Dennis, not sure how comprehensive it is but something I put together a while back for the engine. Anyone feel free to add amend as I can't say it's 100%.

A2   265   91201-300-003   Crank oil seal 30x42x8                      1
B1   45   14401-333-003   Camchain                                               1
B2   266   91201-323-005   Crank oil seal 30x45x8                      1
C1   19   12251-377-000   Head gasket                                       1
C1   22   12329-333-010   Breather gasket                                       1
C1   24   12391-333-000   Rocker gasket                                       1
C1   30   12905-333-000   Oil pipe holder                                       2
C1   242   90442-377-000   Seal Washer 18od x 2.2 x 8mm thread       2
C1   267   91201-324-010   Tacho oil seal 6.5x14.5x7                       1
C1   275   91301-333-000   R oil way O-ring 7 x 1.7                       1
C1   277   91302-001-020   Tappet cover O-ring 30.8 x 3               8
C2   14   12191-377-000   Base gasket                                       1
C2   31   12909-333-000   Cylinder stud seal                               2
C2   32   12910-333-000   Oil orifice seal                                       2
C2   276   91301-377-000   Cylinder base O-ring 55.5 x 2               4
D1   107   16173-253-004   Carb insulator O-ring 27 x 2.4               4
D2   18   12209-333-005   Valve stem seal                                       4
D2   280   91305-333-000   L oil way O-ring 5 x 1.7                       1
E1   8   11394-377-000   Clutch gasket                                       1
E1   238   90431-292-000   Washer.Lock 16mm                               1
E1   268   91202-216-005   Clutch oil seal 14x24x5                       1
E1   269   91204-259-000   Kick start oil seal 16x28x7                       1
F1   274   91301-283-005   Clutch Push Rod O-ring 5 x 2.4               1
F2   9   11398-333-020   Sump gasket                                       1
F2   282   91314-220-000   F main oil way O-ring 16.4 x 2.4               1
F2   283   91315-044-000   R main oil way O-ring 19.4 x 2.8               1
F2   286   91319-300-000   L main oil way O-ring 13 x 2.5               1
F2   287   91329-590-003   Sump filter O-ring 16.5 x 2.8               1
G2   12   11691-333-000   Alternator gasket                               1
G2   139   23114-323-000   Primary drive damper                               8
G2   140   23131-323-000   Primary chain                                       1
G2   239   90433-283-000   Washer.Lock 6mm                               1
H1   213   35751-333-003   Neutral switch O-ring 11.2 x 1.8         1
H1   240   90435-333-000   Washer.Lock 8mm                               1
H1   270   91205-333-005   Drive shaft oil seal 34x52x13.5x15.5       1
H1   271   91206-286-005   Gear change oil seal 14x28x7               1
H2   215   41123-516-00   Oil pump O-ring 63 x 2.5                       1
H2   272   91207-333-000   Mainshaft oil seal 34x9                       1
H2   278   91302-044-010   Oil Pump O-ring 6.9 x 1.5                       2
H2   279   91302-377-000   Oil Pump O-ring 15 x 2.5                       2

Deano400:
G2  281  91309-300-000    Starter Motor O-ring   24.4 x 3.1                           1

Laverda Dave:
Nurse Julie has o-ring kits for the oil pump. She may have others, best to send her a PM.

smoothoperator:
That is a really useful list, thanks Deano.

Navigation

[0] Message Index

[#] Next page