SOHC.co.uk Forums > CB350/400

Generator bolt

(1/2) > >>

allankelly1:
Hi just a quick one

Is the generator rotor retaining bolt a left or right handed thread please



And same question please for the clutch retaining nut please

Just saves on a stupid mistake

Many thanks in advance

Best wishes Al


Sent from my iPhone using Tapatalk

smoothoperator:
Both are right hand thread but wait for a second opinion! I found loosening the generator bolt is easy with an impact driver.

allankelly1:
Thanks all

I can see I will need to spend some time in the machine shop tomorrow making a puller and clutch peg socket

Best wishes Al


Sent from my iPhone using Tapatalk

K2-K6:
Is it the rear wheel spindle that can be used to remove the alternator rotor on these?

allankelly1:

--- Quote from: K2-K6 on August 12, 2021, 05:27:57 PM ---Is it the rear wheel spindle that can be used to remove the alternator rotor on these?

--- End quote ---
Ohh

If it was that would save me a job as will borrow spindle of the other bike if that is the case and just make a plug to jack against

Best wishes Al


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page