SOHC.co.uk Forums > CB500/550

Shift shaft tiny lateral movement?

(1/6) > >>

alexdecker:
Trying to source a left side oil leak, either from the pump or the shift shaft seal. Both the pump and the shift shaft has gotten new seals in the rebuild, but when taking the first ride, it leaked rather a lot still.

Noticed a tiny bit of lateral movement in the shift shaft. Is that normal?

Is there a place I can source all five o-rings for the oil pump in Europe? I noticed that you can not get new screw nor the o-ring for the oil pump, and it’s not in the part list either?

McCabe-Thiele (Ted):
Have you tried Nurse Julie I bought my 400 pump kit from Julie?

alexdecker:

--- Quote from: McCabe-Thiele (Ted) on July 31, 2022, 03:27:29 PM ---Have you tried Nurse Julie I bought my 400 pump kit from Julie?

--- End quote ---

I will write her!

Laverdaroo:
I got the kit, its spot on and dead cheap Alex

Trigger:
Is the gear change seal flush with the case ? If you push it too far back, there is a oil channel that can be blocked by the seal and if this happens the oil is not feeding the internal parts. Engine will not last long and the seal will leak  ;)

Navigation

[0] Message Index

[#] Next page