SOHC.co.uk Forums > CB500/550
Has anyone used these coils?
McCabe-Thiele (Ted):
I found some similar ones on e-bay for my 500 they work just fine except the distance between the mounting points was about 5-10 mm shorter. I just fitted a shorort link bracket to make them fit - mine were branded as Hendler from a firm near Uttoxter, Staffs.
deltarider:
Expect wiring will differ in color and male connectors where you need female and/or vice versa.
McCabe-Thiele (Ted):
Good point DR I had to switch the polarity as well to suit the negative earth - can't remeber if I had to change any bullet connectors.
beardylondon:
Thanks, but im not concerned about making new brackets, thats not my issue, I’m just wondering how easy it is to fit new spark plug caps to the leads?
--- Quote from: McCabe-Thiele (Ted) on April 15, 2024, 11:40:37 AM ---I found some similar ones on e-bay for my 500 they work just fine except the distance between the mounting points was about 5 mm shorter. I just fitted a shorort link bracket to make them fit - mine were branded as Hedler from a firm near Uttoxter, Staffs.
--- End quote ---
McCabe-Thiele (Ted):
The caps just screw into the HT leads if you have the Caps with a screw in fitting like the originals. this link is for the ones I purchased just realised you are looking at the same item.
https://www.ebay.co.uk/itm/151925589049
Theses were mine plenty of HT length so you can fit them easily, looks like the same supplier except the name Hendler no longer shown.
.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version