SOHC.co.uk Forums > CB350/400

Hello All..new to the forum and new to bikes..400 4 Carbs overflowing..

<< < (5/5)

rigwit:

--- Quote from: vivvov on July 24, 2010, 03:44:46 PM ---Hello All

Thought I'd update.
Just polished up float valve seats and needles of 1 and 2 carb...leakage reduced to a couple of drips from number one..good stuff....
Then just taken out no. 3 float valve and Marineboy was right, no 3's o-seal is in bad shape (and I'm guessing the minor drip on no 1 carb is due to o-seal).
So it's a combo of the two.  One I can sort out with polising, the other I can sort out with new
o-seals.

Don't want to come across like a Scourge but anyone got any thoughts on sourcing o-seals as opposed to the whole float valve kit x4.

Vivvov

--- End quote ---
try takeing one to your local pirtek or hydraulick supplier  should get a match

exvalvesetdabbler:
I use a few odd sized O rings at work. The first 2 places I look are

http://www.altecweb.com
http://www.polymax.co.uk

And you can buy just a handful at a time.

Navigation

[0] Message Index

[*] Previous page