SOHC.co.uk Forums > CB500/550
500 oil guide plate position sought.
McCabe-Thiele (Ted):
--- Quote from: Trigger on July 06, 2023, 01:42:39 PM ---Hard to see from that picture but, is the kick start washer behind the circlip ?
--- End quote ---
Yes as per the previous photo spring, washer, circlip last.
McCabe-Thiele (Ted):
--- Quote from: Oddjob on July 06, 2023, 01:32:25 PM ---Spring looks to be the right one to me Ted, maybe it's been cleaned.
--- End quote ---
Yes it was cleaned with brake cleaning fluid - just brushed over to remove the oil discolouration.
Trigger:
--- Quote from: McCabe-Thiele (Ted) on July 06, 2023, 01:43:58 PM ---
--- Quote from: Trigger on July 06, 2023, 01:42:39 PM ---Hard to see from that picture but, is the kick start washer behind the circlip ?
--- End quote ---
Yes as per the previous photo spring, washer, circlip last.
--- End quote ---
The washer should be after the circlip and between the circlip and the side case ::)
McCabe-Thiele (Ted):
--- Quote from: Trigger on July 06, 2023, 01:52:42 PM ---
--- Quote from: McCabe-Thiele (Ted) on July 06, 2023, 01:43:58 PM ---
--- Quote from: Trigger on July 06, 2023, 01:42:39 PM ---Hard to see from that picture but, is the kick start washer behind the circlip ?
--- End quote ---
Yes as per the previous photo spring, washer, circlip last.
--- End quote ---
The washer should be after the circlip and between the circlip and the side case ::)
--- End quote ---
Thanks Graham I just put it back as it was - I have moved it but that has made no difference to the gear selection issue atm.
Ken has spotted something but atm it's evading me as to where the problem lies.
Trigger:
Link page E8 >>> http://manuals.sohc4.net/cb500/service_manual/PL500K0_K1.pdf
As i said it is hard to see from the picture . Easier to pop the gear change lever on and change gear that way ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version