SOHC.co.uk Forums > CB350/400

Starter reduction gear

(1/2) > >>

4wDaz:
Can anyone confirm if it's possible to change the starter reduction gear without splitting the cases? (400/4). I don’t think it can but a customer of mine insists it can be done by just removing the sump, having never tried to do it this way I'm only 99% sure it can't but appreciate any comments

Cheers Daz

Bryanj:
Depends if there is room to get the shaft out and how mechanical your pet spider is

McCabe-Thiele (Ted):
If it is possible, a course in Practical Gynaecology is a baseline - I would imagine taking the engine out & inverting it would be the operating position.

Begs the question why does it need replacement and where have the missing metal parts gone if its worn?

4wDaz:
He reckons it can be done without removing the engine, so not only do you have to be a contortionist you now have to do the job lying on your back.  :o :D

Nurse Julie:

--- Quote from: 4wDaz on July 07, 2023, 02:39:23 PM ---He reckons it can be done without removing the engine, so not only do you have to be a contortionist you now have to do the job lying on your back.  :o :D

--- End quote ---
If he knows so much about it, why isn't he doing it himself 🤣😏🤣🤣

Navigation

[0] Message Index

[#] Next page